Logo for an Vehicle inspection and roadside assistance company

Comments

• May 16, 2013 3:33 PM
   dalefinch
    Project Holder
  I see that some of you have withdrawn your logos from the past contest. Please post them back up, some of them were real good and i would like to review and comment personally back to you so we can finalize this. Thanks
  
  0   0
  
• May 15, 2013 9:50 AM
   dalefinch
    Project Holder
  First we thank everyone for their efforts so far. We see many designs that have great parts of the design so we have decided to extend the contest and clarify what we are looking for. We are looking for a shield as many of you have designed. Some of the shield designs are close. As we communicated, the company is a certification company so the shield must be recognizable on a dealership lot light banner by itself. Or it may be used horizontally with the name and tagline. Many of you have done a great job with the wording for Eye Auto & Assist and the tagline – Inspection Certification Assistance. We also like the car outline and road inside the shield. Must look like a car. Some look like the head of a bird. We want a car if you use this element in your design. We need a three tiered logo to be displayed in the following ways; 1) Eye Auto Assist as a stand alone logo for business cards and some paperwork. If you can work in the tag line of Inspections, Certifications & Assistance that would be great. 2) We need to take the above and incorporate into a shield type logo just highlighting Inspections and Assistance as some of our dealers with not qualify for the Certification process. 3) Then taking the combination of one and two above and adding the word certification as well as adding some art to the logo showing the difference of certification. A “Seal of Approval” with serrated edges like a seal on certificate or school course. Doesn’t have to have serrated edges if you have a creative way to do this. To recap, base logo for business cards and paperwork, logo for dealers that just qualify for the inspection and roadside assistance of the program and finally, a logo that is a combination of all three for dealers that are part of the whole program. It’s also important to note that the shield logos in two and three above are to be somewhat noticeably different so a consumer can tell what type of program the dealer is on. We have rated and eliminated some logos. You can see what we like. Thank you for your continued efforts.
  
  0   0
  
• April 14, 2013 12:58 PM
   ckDesigner
   
  Dear PH, please refer this link and learning how to check privet massages - http://www.mycroburst.com/pages/success#4 thank you.
  
  0   0
  
• April 14, 2013 10:46 AM
   dalefinch
    Project Holder
  Sorry, thanks ckDesigner did know about the messages
  
  0   0
  
• April 14, 2013 10:45 AM
   dalefinch
    Project Holder
  Thanks PH did not know that
  
  0   0
  
• April 13, 2013 9:53 PM
   ckDesigner
   
  Dear PH, Please check your Privet massages top right corner... " Massages (1) " thank you.
  
  0   0
  
• April 11, 2013 10:51 PM
   carlovillamin
   
  As requested
  
  0   0
  
• April 11, 2013 9:58 PM
   dalefinch
    Project Holder
  I have no problem with it being customized and will respect that but it was one of our favorites and we cant see it now.
  
  0   0
  
• April 11, 2013 9:36 PM
   carlovillamin
   
  The font for 8 and 9 is a customized font and should not be copied.
  
  0   0
  
• April 11, 2013 3:50 PM
   dalefinch
    Project Holder
  Is it possible to see #8 and 9 before we make decision?
  
  0   0
  
• April 10, 2013 4:29 PM
   dalefinch
    Project Holder
  Like the shape of the shield in number 11. As well, it would be nice to incorporate the EAA, picture of road, an eye in the shield. Again #11 is close in all of this you could almost take the window in the car and make into an eye with the road underneath. The red does not work in 11 maybe different shades of blue with back and white In the name Eye Auto & Assist we like the Eye large and Auto & Assist underneath Like the font of Eye in 8 & 9 The shield in 25 is close in 26 to dark What about reversing the second E in Eye and try and make it look like an Eye We do like #6 font in its entirety even though above i said we want the EYE larger than Auto Assist, not so much the eye in 6. Looking for a shield that we can make into a window sticker and can put on a large banner or poster to be self explanatory. Think of car dealerships when designing this perhaps variations for the web and print and one for banners and posters.
  
  0   0
  
• April 05, 2013 8:55 AM
   SiteAdmin
   
  Attention Designers!! MycroBurst permits you to submit unlimited designs with unlimited variations. However, if you are providing 2 or 3 different color versions of the same logo in one draft, please make sure that if the particular draft gets finalized, each color version should be separated before you will send the final files. Thanks, MB/LDG/LS Team
  
  0   0